Olet tässä:
Etusivu 
Products 4CR for car refinish Puttys
Products 4CR for car refinish Puttys
Puttys
4CR kiteistä löydät kittaukseen tarvittavat työkalut sekä kitit erilaisille pinnoille ja käyttötarkoituksiin.
4CR ja pintojen onnistunut kittaus on helpompaa kuin uskotkaan!
4CR ja pintojen onnistunut kittaus on helpompaa kuin uskotkaan!
| Name | Thumbnail Image | Description | |||
|---|---|---|---|---|---|
| 2010 Base Putty |
 |
For filling deep dents, even on vertical surfaces. High filling capability, easy sanding. |  |
Ask a question about this product | |
| 2015 Soft Putty |
 |
For filling small dents and holes. High filling performance, easy sanding. | |
Ask a question about this product | |
| 2020 Metallic Putty |
 |
For filling deep dents. High density due to aluminum content. Easy sanding. | |
Ask a question about this product | |
| 2025.1000 Hard Putty |
 |
Repairing of gasoline necks, exterior mirrors, edges and mudgards. Very high degree of hardness. | |
Ask a question about this product | |
| 2030.1000 Contour Putty for Plastics |
 |
Repair small scratches and imperfections on plastic parts. Easy sanding. | |
Ask a question about this product | |
| 2100 Fiberglass Putty |
 |
Fill imperfections on a variety of large surfaces, including steel, aluminum, galvanized and fiberglass surfaces. Will even adhere to small rust areas. Easy sanding. | |
Ask a question about this product | |
| 2200 Elastic Putty white |
 |
One-coat putty that leaves a pin-hole free, easy to sand top surface. Adheres to body filler, metal, fiberglass and plastic. Elastic, non-shrink formulation. | |
Ask a question about this product | |
| 2210 Elastic Putty beige |
 |
One-coat putty that leaves a pin-hole free, easy to sand top surface. Adheres to body filler, metal, fiberglass and plastic. Elastic, non-shrink formulation | |
Ask a question about this product | |
| 2300 Multifunctional Putty |
 |
One product for all uses. Base and fine putty. Adheres to all vehicle surfaces, including galvanized surfaces. Very easy sanding. | |
Ask a question about this product | |
| 2350 Multifunctional Soft Putty |
 |
A high-build and skimming putty in one product that adheres well to all surfaces. Very easy to sand with finer grit paper, which eliminates the risk of sand scratch swelling. | |
Ask a question about this product | |
| 2355.1600 Trillenium Multifunct. Soft Putty |
 |
A high-build and skimming putty in one product that adheres well to all surfaces. Very easy to sand with finer grit paper, which eliminates the risk of sand scratch swelling. | |
Ask a question about this product | |
| 2400.1000 Brushable Putty |
 |
For filling of sanding scratches. Application on curved surfaces and corners. Very easy sanding. Apply with a brush. | |
Ask a question about this product | |
| 2500.1500 Spray Filler |
 |
2K polyester spray filler. Excellent adhesion to all surfaces. Fills holes and scratches. Levels uneven surfaces. Dries quickly. Easy sanding. | |
Ask a question about this product | |
| 2620 Nitrocellulose Putty |
 |
1K Putty for filling scratches and stone-chips while in the paint booth. Nitrocellulose base | |
Ask a question about this product | |
| 2650.0250 Pore Sealer |
 |
1K Putty used to fill micro-pores, especially in plastic parts. | |
Ask a question about this product | |
| 2710 Putty Knife |
 |
Steel spreader with solvent resistant plastic handle. | Ask a question about this product | ||
| 2711.0120 Plastic Spreader |
 |
Plastic spreader, non-breakable and solvent resistant. | Ask a question about this product | ||
| 2712 Rubber Spreader |
 |
Rubber based spreader for applying putty in curves. Solvent resistant. | Ask a question about this product | ||
| 2713.0001 Japan Spreader Set |
 |
Steel spreader, non-breakable. Widths of 2", 3", 4" and 5". | Ask a question about this product | ||
| 2810 Polyester Resin |
 |
Polyester resin for repairing with fiberglass. | |
Ask a question about this product |
Recently Viewed Products
- Monikäyttöinen soft-kitti, sininen (Category: 4CR Kitit)
